TEMAX TLF-5000/500

fire fighting vehicle on SCANIA 4X4 with crew cab

Main vehicle data:

Chassis:
Scania P360CB4X4HHZ (4X4) with:

hydraulic steering with adjustable steering wheel
DC1306 diesel engine, 265 kW (360 ΗΡ) @ 1900 rpm, 1850 Nm @ 1000-1300 rpm
12-speed manual gearbox
transfer case with hi/lo gears
differential lock on front & rear axles

315/80R22,5 tires
150L fuel tank
28V/100A alternator
2x12V/180Ah batteries
full air brakes with ABS

Design:   Modular, with front equipment locker, full width water tank and rear pump locker.
Construction material:
Heavy duty locker frame made from welded stainless steel profiles, paneled with 2mm thick aluminum sheets. Fully walkable roof paneled with 3/4,5mm thick chequered aluminum sheets. Locker floors paneled with 3mm aluminum sheets. Galvanized, welded steel subframe.

Equipment:

• Spring loaded aluminum roller shutters on all lockers
·   Swing out stepboards at all side mounted lockers with warning indicator in cab
·   Automatically activated interior locker lights upon opening a roller shutter with warning indicator in cab
·   Swing out shelves and special brackets for all fire fighting and rescue equipment

Emergency lights and sound systems:

one 100W electronic siren with microphone, with wail/yelp/hi-lo/air horn sounds and public address system
two beacons mounted on cab roof, one beacon at rear roof
reverse buzzer

Fire fighting & rescue equipment:

normal pressure collapsible fire hoses
normal pressure nozzles
dividers
suction Siamese
suction filter
suction hoses
powered chain saw
portable fire extinguishers
tool box

Fire pump:

Rear mounted, PTO driven multi-stage centrifugal pump suitable for high and normal pressure, rated for 3000L/min @ 10bar and 400L/min @ 40bar, equipped with:

automatic primer,
around-the-pump, foam proportioning system 3%+6%,
4 x 2-1/2” normal pressure outlets at rear with valves and couplings,
one normal pressure outlet to feed the roof monitor,
one normal pressure outlet to feed the ground sweep nozzle system,
one normal pressure outlet for tank filling via the pump,
two high pressure outlets to feed the hose reels,
complete control panel

Water tank

5000L capacity, made from stainless steel 316L, 4mm thick. Equipped with:

500mm dia. manhole,
overflow and vent system,
baffles,
2 x 2-1/2” filling inlets with valves and couplings mounted at vehicle sides,
suction sump with drain valve and filter to pump suction intake,
level indicator (sender),
backup level indicator with clear PVC tube and isolation valve

Foam tank:

500L capacity, made from stainless steel 304, 3mm thick., integrated in the pump locker. Equipped with:

manhole 500mm dia.,
overflow and vent system,
baffles,
24VDC foam filling pump,
drain valve and supply to the foam proportioner,
level indicator (sender),
backup level indicator with clear PVC tube and isolation valve

Roof monitor:

Electronically operated via joystick, controlled by the driver or co-driver, mounted on the cab roof, rated for 2400L/min @ 10bar, equipped with:

air aspirated foam tube with electric jaws
spotlights for night operations
Monitor rotation: 270 deg
Monitor depression/elevation: -15 to +70 deg

In cab control panel:

Complete in-cab control panel to control the pump, the foam proportioning system, the roof monitor as well as the ground sweep system

Two, axially fed high pressure hose reels, each equipped with 60m non collapsible high pressure rubber hoses, 25mm dia. and high pressure fog guns, each rated for 210L/min @ 40bar. Equipped with manual and electric rewind.