TEMAX TLF-2500/300

fire fighting vehicle on Mercedes Benz Atego 1018 (4×2)

Main vehicle data:

Chassis:
Mercedes Benz Atego 1018 (4×2) with:

original Mercedes Benz standard cab with 1+2 seating
hydraulic steering with adjustable steering wheel
OM934LA diesel engine, 130 kW (177 ΗΡ) @ 2200 rpm, 750Nm @ 1200-1600 rpm
6-speed manual gearbox

235/75R17,5 tires
120L fuel tank
28V/80A alternator
2x12V/135Ah batteries
full air brakes with ABS

Design: Modular, with front equipment locker, full width water tank and rear pump locker with foam tank
Construction material:
Heavy duty locker frame made from welded stainless steel profiles, paneled with 2mm thick aluminum sheets. Fully walkable roof paneled with 3/4,5mm thick chequered aluminum sheets. Locker floors paneled with 3mm aluminum sheets. Galvanized, welded steel subframe.

Equipment:

• Spring loaded aluminum roller shutters on all lockers
• Swing out stepboards at all side mounted lockers with warning indicator in cab
• Automatically activated interior locker lights upon opening a roller shutter with warning indicator in cab
• Swing out shelves and special brackets for all fire fighting equipment

Emergency lights and sound systems:

one 100W electronic siren with microphone, with wail/yelp/hi-lo/air horn sounds and public address system
two beacons mounted on cab roof, one beacon at rear roof
reverse buzzer

Fire fighting & rescue equipment:

normal pressure collapsible fire hoses
normal pressure nozzles
dividers
suction Siamese
suction filter
suction hoses
powered chain saw
portable fire extinguishers
tool box
200mm spotlight, with extension tripod and cable drum
7m extendable ladder
4m ladder with hook

Fire pump:

Rear mounted, PTO driven multi-stage centrifugal pump suitable for high and normal pressure, rated for 2500L/min @ 10bar and 400L/min @ 40bar, equipped with:

automatic primer,
around-the-pump, foam proportioning system 1%+3%+6%,
2/4 x 2-1/2” normal pressure outlets at rear with valves and couplings,
one normal pressure outlet to feed the roof monitor,
one normal pressure outlet to feed the ground sweep nozzle system,
one normal pressure outlet for tank filling via the pump,
two high pressure outlets to feed the hose reels,
complete control panel

Water tank

2500L capacity, made from mild steel, fully galvanized, 4mm thick. Equipped with:

500mm dia. manhole,
overflow and vent system,
baffles,
2 x 2-1/2” filling inlets with valves and couplings mounted at vehicle sides,
suction sump with drain valve and filter to pump suction intake,
level indicator (sender),
backup level indicator with clear PVC tube and isolation valve

Foam tank:

300L capacity, made from stainless steel 304, 3mm thick, integrated in the pump locker. Equipped with:

inspection hole with cover 300mm dia.,
overflow and vent system,
baffles,
24VDC foam filling pump,
drain valve and supply to the foam proportioner,
level indicator (sender),
backup level indicator with clear PVC tube and isolation valve

Roof monitor:

Manually operated roof monitor, mounted on the superstructure roof, rated for 2400L/min @ 10bar, equipped with:

air aspirated foam tube
spotlights for night operations
Monitor rotation: 360 deg
Monitor depression/elevation: -15 to +80 deg

In cab control panel:

Complete in-cab control panel to control the pump, the foam proportioning system, the roof monitor as well as the ground sweep system

One, axially fed high pressure hose reel, equipped with 60m non collapsible high pressure rubber hose, 25mm dia. and high pressure fog gun, rated for 210L/min @ 40bar. Equipped with manual and electric rewind..