TEMAX TLF-2500/300 – BSF22MDT

rescue & fire fighting vehicle on MAN TGM 18.340 BB (4X2)

Main vehicle data:

Chassis:
MAN TGM 18.340 (4X2) with:

original MAN 2-door cab with 1+2 seating
hydraulic steering with adjustable steering wheel
MAN diesel engine, 250 kW (340 ΗΡ) @ 2300 rpm, 1250Nm @ 1200 rpm
12-speed automatic gearbox
front steel suspension, rear air suspension

315/80R22,5 tires
300L fuel tank
28V/80A alternator
2x12V/175Ah batteries
full air brakes with ABS, ASR and ESP

Design:   One 3-section telescopic and one articulated boom system. Rescue cage mounted at the end of the articulated boom. Fully electro-hydraulic operation with fail-safe functions. Four (4) “A-arm” type outriggers.
Construction material:
Heavy duty locker frame made from welded stainless steel profiles, paneled with 2mm thick aluminum sheets. Fully walkable roof paneled with 3/4,5mm thick chequered aluminum sheets. Locker floors paneled with 3mm aluminum sheets.

Equipment:

• Spring loaded aluminum roller shutters on all lockers
·   Swing out stepboards at all side mounted lockers with warning indicator in cab
·   Automatically activated interior locker lights upon opening a roller shutter with warning indicator in cab
·   Swing out shelves and special brackets for all fire fighting equipment

TEMAX TLF-2500/300 – BSF22MDT — **Equipment**

Performance:

22m maximum operation height
11m maximum horizontal outreach

Emergency lights and sound systems:

one 100W electronic siren with microphone, with wail/yelp/hi-lo/air horn sounds and public address system
two beacons mounted on cab roof, one beacon at rear roof
reverse buzzer

Fire fighting & rescue equipment:

normal pressure collapsible fire hoses
normal pressure nozzles
dividers
suction Siamese
suction filter
suction hoses
powered chain saw
portable fire extinguishers
tool box
200mm spotlight, with extension tripod and cable drum
7m extendable ladder
4m ladder with hook

Rescue cage:

270kg capacity
cage slewing +/- 45 deg.
complete control panel
dimensions: 1600x800x1100mm (LxWxH)
one side door with incorporated ladder to access the cage
one rescue platform appx. 1000x500mm
remotely controlled monitor with manual override
hose reel with 20m long hose 25mm dia. and nozzle
water/foam feed via permanently installed telescopic piping system
2 nozzles & 2 floodlights mounted under the cage floor
2 floodlights
3 breathing air supply sockets for SCBA masks
220/380VAC outlets
rescue stretcher / lowering device support bracket
lowering device

Hydraulic platform equipment:

Front mounted access platform:

located left and right of the vehicle
with one ladder at each side to access the platform from the ground
with one ladder to access the vehicle roof

Turntable operation panel:

side mounted control panel incorporating:

detachable platform control panel with extension cable
outrigger control panel
bubble level indicator
intercom system between turntable operator and cage operator
emergency manual control of outriggers

Breathing air supply to the cage:

Compressed air supply to the cage comprising of:

4 compressed air cylinders 6L/300bar each
control panel with valves & gauges
permanently installed air supply hose from the cylinders to the cage

Foam tank:

Dual 500L capacity (400+100L), made from stainless steel 304, 3mm thick, integrated in the pump locker. Each compartment equipped with:

inspection hole with cover 300mm dia.,
overflow and vent system,
baffles,
24VDC foam filling pump,
drain valve and supply to the foam proportioner,
level indicator (sender),
backup level indicator with clear PVC tube and isolation valve

Fire pump:

Rear mounted, PTO driven multi-stage centrifugal pump suitable for high and normal pressure, rated for 2000L/min @ 10bar and 400L/min @ 40bar, equipped with: